
Diffusion Bonding in 3D-Manufacturing of Titanium Alloy Structures
Fig. 1: Optical images (“top view”) of the initial Ti-6Al-4V alloy parts.
Artikel lesen →Aktuelles Mat-Tech steht immer an der Spitze der weltweiten Fortschritte im High-Tech-Löten. Unsere Entwicklungs- und Testabteilung nutzt nicht nur die neuesten Forschungsergebnisse, sondern spielt auch eine aktive Rolle in verschiedenen internationalen Initiativen. Wir legen großen Wert darauf, die Erkenntnisse, die wir gewinnen, an unsere Kunden, Branchenkollegen und andere Stakeholder weiterzugeben, die sich für High-Tech-Löten interessieren. […]
Mat-Tech steht immer an der Spitze der weltweiten Fortschritte im High-Tech-Löten. Unsere Entwicklungs- und Testabteilung nutzt nicht nur die neuesten Forschungsergebnisse, sondern spielt auch eine aktive Rolle in verschiedenen internationalen Initiativen. Wir legen großen Wert darauf, die Erkenntnisse, die wir gewinnen, an unsere Kunden, Branchenkollegen und andere Stakeholder weiterzugeben, die sich für High-Tech-Löten interessieren. Erleben Sie, wie wir unser Fachwissen unter anderem auf Ausstellungen, Workshops und über diese Plattform teilen.

Fig. 1: Optical images (“top view”) of the initial Ti-6Al-4V alloy parts.
Artikel lesen →
ABSTRACTSuccessful brazing of any Aluminium alloy requires prior removal of the native surface oxide film,which is usually done by…
Artikel lesen →
Aluminium Oxide Ceramics due primarily to its good heat conductivity (of about 30 W×m-1×K-1) and a relatively low cost is considered as an…
Artikel lesen →
Although cemented carbide is resistance to thermal shock, it will not withstand stresses caused by severe thermal gradients when brazed to…
Artikel lesen →
Brazing of several refractory metals, namely, Tungsten, Molybdenum and Niobium as wellas austenitic stainless steel AISI 304 to pure Copper…
Artikel lesen →
Our previous investigation of the interfacial regions in the ”(p-n) thermocouple” / Cu- connector assembly (Project No. 2012-3067-0616) was…
Artikel lesen →
The continued demand for reliable sources of energy can be addressed by the discovery of new sustainable energy sources as well as…
Artikel lesen →
The present Project is dealing with the fabrication of electrical (high-voltage) feedthrough consisting of YSZ (ZrO2 + 3 % mole Y2O3) body…
Artikel lesen →
Composition (in weight %) of the low-carbon, low-alloy P265GH-(“killed”) steel is C0.2; Si0.4; Mn 0.8-1.4; P0.025; S0.015; N0.012; Cu0.3;…
Artikel lesen →
Aluminium Oxide Ceramics is considered as an attractive material in designing of various components when “thermal management issues” are of…
Artikel lesen →
Brazing and Diffusion Bonding TZM to Graphite Using Cu, Ti, Pd and Cr Filler Metals
Artikel lesen →
One can braze the higher Mg-content heat-treatable AA-6082 series Al alloys, (containing Mg, Si, Fe, Mn, Cr, Zn, Ti), with a near-eutectic…
Artikel lesen →
This combination of technologies is essential in designing various plate and shell-type heat-exchangers. Application is shown in the…
Artikel lesen →
Thermo-mechanical stresses that built up from cool-down after soldering will affect the overall longevity performance of such devices. To…
Artikel lesen →
Certain Aluminium alloys can be successfully soldered using low melting solders. Read here how we do it.
Artikel lesen →
The stand-off of a flip-chip is governed by the equilibrium between the weight of the chip and the counteracting spring formed by the…
Artikel lesen →
The shape of a liquid drop is governed by what is known as the Young-LaPlace equation. It was derived more or less simultaneously by Thomas…
Artikel lesen →
Transient Liquid Phase Bonding is applied well below the aging temperature (450-480˚C) of the CuCrZr-alloy, whereas the resulting joints…
Artikel lesen →
Ultra-low melting leadfree solder compositions can be used for stress reduction in joints in a bio-ambient or temperature sensitive…
Artikel lesen →
The relation between surface tension and contact angles as a measure for the wetting capability is due to Thomas Young (1804). A short…
Artikel lesen →
For tracking of assets, low-cost interconnect technologies are required. This can be achieved through a low melting lead-free matrix with…
Artikel lesen →
In case one assumes that the bump is built from shearing discs, a simple model of a deflected bump can be made.
Artikel lesen →
The material of CLIC accelerating structure disks is high conductivity Oxygen-free-electronic Cu. Fabrication of the CLIC disk stack occurs…
Artikel lesen →
Soldering with low-temperature Pb-free alloys is a viable replacement for conductive adhesives in back-contacted solar panels.
Artikel lesen →
In 1819 Pierre Louis Dulong and Alexis Thérèse Petit found that the specific molar heat for metals is approximately 3 R @ 25 J/K. Here R is…
Artikel lesen →Sprechen wir